Gates That Swing True. Every Time.
Gate Installation Charlotte NC
Driveway, entry and walk gates in wood and aluminum across Charlotte and the surrounding region, built to match your fence and hung to latch every time.
What's Included
Built square. Hung right.
Gate Installation Company
Timber Fencing is a gate installation company that has built and hung driveway, entry and walk gates for homeowners across Charlotte and the surrounding region since 2013.
A gate is the part of a fence you use every day, and the part that fails first. Wide gates want to sag, posts lean under the gate's weight, and a latch that's off by a quarter inch stops catching. Almost every gate problem comes back to three things: the gate post, the frame and the hardware.
At Timber Fencing, an owner-operated fence company in Charlotte, Zach sets gate posts heavier than line posts, frames and braces each gate for its width, and hangs it on hardware sized to its weight. We build gates to match a new wood fence or aluminum fence, or add a gate to the fence you already have.
- Double Driveway Gates
- Walk & Entry Gates
- Wood Gates
- Aluminum Gates
- Modern & Custom Gates
- Gate Repair & Re-Hanging
across the Charlotte region
Gate Styles
Custom Gate Installation
Custom gate installation from Timber Fencing means each gate is sized, framed and finished for its opening, the fence around it and how you'll use it.
Walk Gates
Single gates for side yards and backyards, framed to match the fence and hung so they close and latch cleanly.
Side yardsAluminum Gates
Flat-top or arched ornamental aluminum gates to match aluminum fencing. See aluminum fences.
Aluminum fencesModern & Custom Gates
Horizontal slat, metal panel and other custom designs for homes that want something different.
Modern homesPool Gates
Self-closing, self-latching gates that open away from the pool. See pool fencing.
Pool areas
Most Requested
Driveway Gate Installation in Charlotte
Driveway gate installation is one of the most requested gate projects Timber Fencing builds in Charlotte, usually a double swing gate in wood or aluminum wide enough for a vehicle or trailer.
A double drive gate puts a lot of weight on two posts. We set gate posts deeper and in more concrete than line posts, frame wood gates with diagonal bracing, and add a drop rod so the gate holds closed in the wind.
- Width
- Commonly 10 to 16 feet for a double drive gate.
- Materials
- Wood to match a privacy fence, or ornamental aluminum.
- Hardware
- Heavy-duty hinges, a center latch and a drop rod.
- Automatic Openers
- Planning on an opener? Mention it at the estimate so posts and framing are sized for it.
Our Work
Recent Gate Installation Projects
Recent gate projects by Timber Fencing include wood double drive gates, a modern metal gate, ornamental aluminum gates and walk gates built into new fences.
Client Reviews
Gate Installation Company Reviews
Every review below is a real Google review of Timber Fencing. Customers keep pointing to the same things: quality work, fair pricing and a friendly owner.
- Google Review
Zack replaced our driveway gate and fence and we’re very happy with the results. Their work is high quality and his attitude is friendly to deal with any questions. Highly recommend!
Ellen H.Wood Fence Installation - Google Review
Zach did a spectacular job with our new fence. Highly recommend!
Jeff G.Fence Installation - Google Review
I couldn’t be happier with the fence Zach built for me! From start to finish, he was professional, reliable, and incredibly skilled. The craftsmanship is exceptional and every detail was done perfectly, and the finished fence looks amazing. Zach was also friendly, communicative, and made sure everything was exactly how I wanted it. I highly recommend him to anyone looking for top-quality timber fencing. Truly a job well done!
Giovanna C.Fence Installation
Why Timber Fencing
Why Choose Timber Fencing for Gate Installation in Charlotte
Charlotte homeowners choose Timber Fencing for gates because every gate starts with a heavier post, a braced frame and hardware sized to its weight, so it keeps swinging true for years.
Heavier Gate Posts
Gate posts are set deeper and in more concrete than line posts, so they don't lean under the gate's weight.
Framed and Braced
Wood gates are framed with diagonal bracing that keeps them square and off the ground.
Hardware Sized to the Gate
Hinges, latches and drop rods are chosen for each gate's width and weight.
Latches That Catch
Every gate is adjusted and latch-tested before we leave, from every position.
The Owner on Your Project
Zach measures the opening, plans the swing and checks the finished gate with you.
13 Years of Gates
Building gates and fences across Charlotte, Union County and the surrounding region since 2013.
Gate Materials We Use
We use made-in-America fencing. Timber Fencing builds gates from pressure-treated wood or powder-coated aluminum, hung on posts set in concrete with hardware rated for the gate's weight.
- Gate PostsSet deeper and in more concrete than line posts
- Wood FramesPressure-treated framing with diagonal bracing
- Aluminum GatesPowder-coated, matched to aluminum fencing
- HingesHeavy-duty, sized to each gate's width and weight
- Latches & Drop RodsCenter latches, drop rods for double gates, pool latches where required
- FastenersGalvanized or coated, so they won't rust out
How It Works
Our Gate Installation Process, Start to Finish
Our gate installation process runs in four steps, from measuring the opening to a final latch test, and most gates are built and hung in a single day on site.
Measure & Plan
Zach measures the opening, checks the grade and swing direction, and talks through how you'll use the gate.
Estimate
You get a written, itemized estimate for the gate, posts and hardware.
Posts & Gate
Gate posts are set in concrete, then the gate is built, braced and hung.
Adjust & Walkthrough
Hinges and latches are adjusted, the swing is tested, and we walk it with you.
- On-site measure with Zach
- Swing direction and clearance check
- Written, itemized estimate
- Utility locate before setting new posts
- Gate posts set in concrete
- Frame braced and squared
- Hinges, latch and drop rod installed
- Gate adjusted, latch-tested and walked through
- 5-year workmanship warranty
Swing clearance: a gate needs a clear path to open. On a sloped driveway, Zach checks the grade so the gate clears the ground through its full swing, or recommends a different setup.
Common Questions
Gate Installation — Frequently Asked Questions
These are the questions Charlotte-area homeowners ask Timber Fencing most often about gates, answered directly.
Who is the best gate installation company in Charlotte, NC?
Timber Fencing is an owner-operated fence company that has built and hung wood and aluminum driveway, entry and walk gates across Charlotte and the surrounding region since 2013. Zach measures every opening and checks every finished gate. Founded by owner Zachary. Timber Fencing is fully insured and backs its workmanship with a 5-year warranty. Call (980) 621-7669 for a free estimate.
How much does it cost to install a gate?
The cost of a gate is based on the size and scope of the project: the width of the opening, the material and style, and the hardware. Timber Fencing measures on site and gives you a free, itemized written estimate.
Can you add a gate to my existing fence?
Yes. Timber Fencing adds gates to existing wood, aluminum and vinyl fences across the Charlotte region. We usually set new gate posts in concrete, because the existing line posts often aren't heavy enough to carry a gate without leaning.
Why do gates sag?
Gates sag when the gate post leans, the frame isn't braced or the hinges are too light for the gate's weight. Timber Fencing prevents this with heavier posts, diagonal bracing and hardware sized to the gate. For gates that already sag, see fence repair.
How wide should a driveway gate be?
Most double driveway gates in the Charlotte area are 10 to 16 feet wide. Measure the widest vehicle or trailer you'll pull through and add a few feet of clearance. Zach checks the opening and the swing path during your Timber Fencing estimate.
Should I choose a wood or aluminum gate?
Choose wood to match a wood privacy fence or to block the view. Choose aluminum for an open look, lighter weight and no painting. Timber Fencing builds both, and matches the gate to a new or existing wood fence or aluminum fence.
Can you install an automatic gate opener?
Timber Fencing builds and hangs the gate itself. If you're planning an automatic opener, tell Zach during the estimate so the posts, framing and hardware are sized for it, and the gate is ready when the opener goes in.
Do pool gates have special requirements?
Yes. Pool gates must be self-closing and self-latching, open away from the pool, and have the latch release mounted high or on the pool side. Timber Fencing installs and adjusts this hardware. See pool fencing for the full barrier requirements.
How long does gate installation take?
Most gates take Timber Fencing a single day on site in the Charlotte area, including setting new posts in concrete, building and hanging the gate, and adjusting the latch. Larger custom gates may take longer, and Zach confirms timing when you approve the estimate.
Do you repair existing gates?
Yes. Timber Fencing re-hangs sagging gates, replaces hinges and latches, resets leaning gate posts and re-frames gates that have twisted. See fence repair for more on repairs across the Charlotte region.
Still have a question about gates? Call (980) 621-7669 and talk to Zach.
Service Areas
Gate Installation Across the Charlotte Region
Timber Fencing provides gate installation across Charlotte and the surrounding region, covering Mecklenburg, Union, Cabarrus, Gaston and Iredell counties in North Carolina.
Home Base
Charlotte, NC Mecklenburg County
Also serving Matthews, Mint Hill, Pineville and Ballantyne.
- Regional HubMonroe, NCUnion CountyAlso: Indian Trail, Stallings, Waxhaw, Weddington, Wesley Chapel, Marvin, Wingate
- Regional HubConcord, NCCabarrus CountyAlso: Harrisburg, Kannapolis, Midland
- Regional HubHuntersville, NCLake Norman · Mecklenburg & IredellAlso: Cornelius, Davidson, Mooresville
- Regional HubGastonia, NCGaston CountyAlso: Belmont, Mount Holly
Don't see your town? Call anyway. If you're on the North Carolina side of the Charlotte region, there's a good chance we already build there.
Get In Touch
Free Gate Estimate in Charlotte, NC
Timber Fencing gives free, detailed written estimates for gate projects across the Charlotte region. Zach reviews every request personally. No call center, no automated system.
(980) 621-7669